News

Ford Tests Coronavirus Technology In Police Vehicles

Written By: CarPro | Jun 3, 2020 12:00:00 AM

Ford Interceptor
Credit: Ford
So how do you kill the Coronavirus in a vehicle? Ford�s idea is to �bake� it. The automaker says its designed new sanitization software to pilot with its Police Interceptor Utility to help protect law enforcement officers from COVID-19. The software works with the vehicle�s climate system to heat up the interior long enough to neutralize COVID-19 virus if present. It�s available immediately on all 2013-19 Police Interceptor Utility vehicles in the United States, Canada and other countries around the world.

�First responders are on the front lines protecting all of us. They are exposed to the virus and are in dire need of protective measures,� said Hau Thai-Tang, Ford chief product development and purchasing officer. �We looked at what�s in our arsenal and how we could step up to help. In this case, we�ve turned the vehicle�s powertrain and heat control systems into a virus neutralizer.�

How it works

When activated, the software works with the vehicle�s climate system to make the interior hotter than 132.8 degrees Fahrenheit, (hotter than Death Valley on its hottest day). It stays that way for 15 minutes � long enough to help disinfect vehicle touchpoints. It does so by warming the engine to an elevated level, and both heat and fan settings operate on high. The software automatically monitors interior temperatures until the entire passenger compartment hits the optimal level, then that temperature is maintained for 15 minutes.

Ford worked closely with Ohio State University to determine the temperature and time duration needed to help inactivate the COVID-19 virus.

ford police interceptor utility
Ford is piloting a new heated sanitization software solution that can help neutralize the COVID-19 virus inside its Police Interceptor Utility vehicles. Credit: Ford

�Our studies with Ford Motor Company indicate that exposing coronaviruses to temperatures of 56 degrees Celsius, or 132.8 degrees Fahrenheit, for 15 minutes reduces the viral concentration by greater than 99 percent on interior surfaces and materials used inside Police Interceptor Utility vehicles,� said Jeff Jahnes and Jesse Kwiek, laboratory supervisors at The Ohio State University department of microbiology.

There are several ways the vehicle will indicate when the process begins and ends. Hazard lights and tail lights will flash in a pre-set pattern to notify when the process has begun, then will change at the end to signal completion. The vehicle�s instrument cluster will also indicate progress. A cool-down process brings the temperature down from its highest points.

Ford says this heated process can be used by law enforcement regularly to help sanitize vehicles when officers are not inside. When used in conjunction with sanitization guidelines approved by Centers for Disease Control and Prevention, flooding the passenger compartment with elevated air temperature can help reach areas that may be missed by manual disinfecting procedures. Heat has the ability to seep into crevices and hard-to-reach areas, helping reduce the impact of human error in applying chemical disinfectants.

Ford conducted software operational trials in vehicles owned by the New York City Police Department, Los Angeles Police Department, Michigan State Police, Massachusetts State Police, Boardman Township Police Department in Ohio and Seminole County Sheriff�s Office in Florida.

The need to move fast

Ford�s engineering team initiated the project in late March. Shortly after, a discussion with the New York City Police Department alerted Ford to its need for a more efficient disinfecting process during the pandemic.

�Law enforcement officers are being dispatched as emergency responders in some cases where ambulances may not be available,� said Stephen Tyler, Ford police brand marketing manager. �During one trip, officers may be transporting a coronavirus patient to a hospital, while another trip may involve an occupant who may be asymptomatic.�

The system will supplement manual disinfecting methods.

�Officers can now use this self-cleaning mode as an extra layer of protection inside the vehicle in areas where manual cleaning is prone to be overlooked,� said Tyler. �This virus is an invisible enemy and we are proud to provide a solution to help the law enforcement community fight it.�

Initial rollout

Large departments with their own service centers can install the software solution using their own diagnostic service tools, while other fleets can work with their local dealers to install the software for 2013-19 Police Interceptor Utility vehicles.

For 2016-19 police vehicles, the heated software process can be activated by a smart sequence of commands that involves pressing cruise control buttons in a predefined order. For 2013-15 vehicles, this mode can be activated and carried out through an external tool that connects to the onboard diagnostics port.

�Vehicles from the 2013 to 2019 model years make up the majority of Police Interceptor Utility vehicles currently in use by first responders,� said Tyler. �Delivering this new capability to these vehicles first allows us to help as many officers as possible, as quickly as possible.�

Ford says it will continue to work on ways to bring this software capability to additional Ford police vehicles.
null