Search
Monday 25 September 2017
  • :
  • :

Fan Belts Being Phased Out – Car Pro News

fan beltsThe old-fashioned fan belt is losing its grip.
The familiar toothed rubber belt, a staple of car engines for nearly a century, is driving fewer mechanical components as electricity takes over more functions under the hood.
The belt, originally dubbed the fan belt because it connected the crankshaft to the engine’s cooling fan, is now typically called the accessory drive belt.
Not only has the number of accessory drive belts decreased from as many as four on some 1970s and ’80s engines to just one today, but so has the length.
The Chevrolet Volt is down to one small belt that drives only the water pump.
Engineers have been replacing belt-driven accessories, such as the power steering and water pumps, with more energy efficient, electrically driven components.
Belt-driven systems typically draw power constantly. Electric systems use energy only when it is needed.
Other parts that are candidates for removal from accessory belts are the air conditioner and alternator, and in diesel engines, a vacuum pump.
Three 2014 gasoline-electric hybrids — the Toyota Prius, Ford C-Max and Ford Fusion Hybrid — have no belts and no components bolted to the front of the engine.
More beltless engines are coming as automakers shift belt-driven accessories to electricity. The main reason for the disappearing belts: higher fuel economy. Automakers are rushing to meet 54.5 mpg fuel economy standards by the 2025 model year.
“We are being asked to do whatever we can to improve fuel economy,” said Scott Willis, Ford Motor Co.’s North American technical specialist for front engine accessory drives.
Because today’s serpentine fan belt runs under high tension on a series of rollers and pulleys on the front of the engine, it generates friction, which lowers fuel economy.
A typical Mercedes-Benz V-8 engine, for example, has one long serpentine belt that turns the water pump, alternator, air conditioner and power steering pump. It snakes around 10 pulleys, rollers and tensioners.
“Everywhere the belt touches something and bends and stretches, you have friction losses. More pulleys and more tension mean more losses,” Willis said.




Leave a Reply

Your email address will not be published. Required fields are marked *